|
Imperial Productions
®
Tower of
the Winds
AKA - Known as
Temple of
the Winds
The
Temple of the Winds is simplified variation of the Greek Corinthian. Found
in the Athens Agora the "Temple of the Winds" is really the
Tower of the winds which housed a water clock. The
capitals held up the porticos. This
distinctive capital was documented
by James Stuart and Nicholas Revett (1751 to 1753). There
is one row of acanthus leaves with a
row of plain water leaves
supporting a square abacus. The base is
always an
Attic Style. Shafts can be Fluted,
Smooth or Rope
profiles. Finish your new Capitals & Bases with Specialty
Paints and
Real Metal Coating
|
For Prices Select Shaft Type & Height
|
Temple with Ropes |
 |
|
|
 |
Temple of the Winds
Capitals
The
Temple of the Winds is simplified variation of the Greek Corinthian. Found
in the Athens Agora the "Temple of the Winds" is really the
Tower of the winds which housed a water clock. The
capitals held up the porticos. This
distinctive capital was documented
by James Stuart and Nicholas Revett (1751 to 1753). There
is one row of acanthus leaves with a
row of plain water leaves
supporting a square abacus.
Explore the
Temple Capital Collection |
|
|
Attic Bases
Attic Bases are utilized
on all classical orders of columns and can be ordered separately. Specify split for post wrap,
split to engage a half column or wedged for corner placement.
For economical solutions:
Attic Bases made from
ArchPolymerTM,
a synthetic wood are lite weight, hollow, and decorative thus they do not hold
load as they wrap the
bottom of the column shaft.
Hardwood
Attic Bases are solid and hold load. We recommend White Oak for exterior
durability and hardness. Historic Reproductions are welcome for specific sizes.
Made up to 36" diameter.
The superior
material is
GFRC-ZeamentTM
is a Portland Cement with a very smooth finish. The Torus portion is
hollow to wrap around a column shaft, and the Plinth Frame
is strong to hold the load of the shaft.
Explore
Attic Bases
|
|
|
Load Plugs for
Hollow Caps & Bases
To transform hollow
decorative
ArchPolymerTM
Attic Bases to carry load,
we manufacture load plugs that are placed inside a hollow base or capital.
Specify the exact size to be fabricated from White Oak up to 36" diameters or
GFRC-ZeamentTM.
Both GFRC-Zeament and
Hardwood Attic bases
hold load and do not
require plugs
Explore
Load Plugs
|
|
|
Post Wrap Charts
CAD
drawing for Post Wraps. How to fit a square post into a round hole.
Drawings for multiple sizes.
Explore the Charts
|
|
 |
Steel Load Posts
Custom Made to
Order
Load posts can be
ordered for post wraps. Custom made from Galvanized steel to wrap
Decorative columns.
Explore Steel Load Posts for Wraps |
|
Hardwood
Hand Crafted
All parts can
be
customized
|
Hardwood
Columns
Interior Stain & Paint: American Poplar, Alder, Ash,
Basswood,
Beech,
Birch Cherry,
Maple, Maple (Sap), Mahogany-African,
Oak
(Red), Oak (White), Walnut
Exterior (Stain & Paint)
White Pine, Knotty Pine, Clear Pine, Western Red Cedar
Explore Hardwoods
|
|
Fiberglass
Interior /
Exterior
Made from
Molds |
Fiberglass
Load Bearing
Columns
Fiberglass is a
combination of
polyester resins and glass fibers with a Gelcoat covering. They are
made from molds and approximately 2-3lbs per square foot.
Fiberglass is weather resistant and is suitable for emersion in water for
fountains. The tensile strength is superior for earthquakes and hurricane zones
however they do requires to be affixed to the substrate with hardware
supplied by others. Fiberglass columns meet
ASTM-E84 fire rating standards when specified as an upgrade. They
are molded in 2 pieces and seamlessly put together when ordered whole.
Specify in halves for post wrap or pilaster applications or wedged for
corners.
Use Bondo to cover seams.
Expensive new molds are required for customization however they can be cut to height
by the factory or others.
Explore
Fiberglass
|
|
FRP-PolyCompTM
Interior /
Exterior
Made from
Molds
 |
FRP-PolyCompTM
Load Bearing
Composite Columns
FRP is 70%
calcium carbonate, 5% marble chips, 25% Polyester Resins.
Meets
ASTM-E84 fire rating. Specify in halves for post wrap or pilaster
applications or wedged for corners. Expensive new molds are
required for customization however they can be cut to height by the
factory or others.
Explore
FRP-PolyCompTM
|
|
ArchPolymerTM
Interior /
Exterior
Made from
Molds |
ArchPolymerTM
Decorative Columns
ArchPolymerTM
is a
synthetic wood with the same consistency as white pine. It is not a
plastic. It is rot, water and insect resistant, cuts like wood and
comes white primed. Class A Fire Rating is an upgrade that can be
specified to put into the mix. They are molded in 2 pieces. Use
our PolySpackling Compound to cover any seams. They can be cut to height
by the factory or others. For custom sizes for volume orders request a
quote.
Explore
ArchPolymerTM
|
|
|
Real
Metal Coating
All of the column materials can be coated
with real metal. This applies particularly to captials and bases.
We have done real metal coating on column shafts as well
Explore Real Metal Coating
|
|
|
Metallic
Paints
For finishing shops or the DIY client, we
offer Ronan Aqua Leaf Real Metal Paints. Apply with an air brush or
regular brush for highlighting golds, silvers and bronzes.
Explore Ronan Paints
|
Go
To Main Column Page
Go
To Main Column Page
|
How to Order Products 1-800-399-7585
1-416-264-6096
email:
sales@imperialproductions.com |
|
 
 |
|
* All Prices & specifications in this website subject to change without
notice |
|
* Prices are net, Freight, Taxes & Duties charged where applicable otherwise
client is responsible for remittance |
|
* Measurements are approximate only, Final Product may vary from this
website |
|
COPYRIGHT MRDCI Martin Richards Design and Contracting Inc, Martin Richards DesignTM
and Imperial
Productions®
Feb 2018 all rights
reserved
|
|
Last
Update JAN-26 |
|
