Tuscan Column Capital Replacements from Imperial 1-800-399-7585

Imperial Columns, Caps and Bases custom productions

Belly Cylinder Rope Square Octagon Capitals Bases Pilasters Pilaster-Caps Load Posts Plant-Stands Porch-Posts

Round Classical: Doric Tuscan Corinthian Greek-Doric Ionic Scamozzi Temple-Winds Steel Posts

Carvings Corbels Ceiling-Walls Domes Facades Fireplace-Mantels Garden Kitchen-Posts

Legs Medallions Mouldings Niches Pediments Pilasters Railings Shutters Tin-Ceilings Finishes Ronan-Paint

Policy Commercial Custom-Dept Freight YouTube Catalogs Design Theory Materials Install-Products

Imperial Productions®

64 Tuscan Capitals

Sorted by Hole Size

Custom Sizes Available

Fast

Track to

Standard

Models

Standard Collection Sorted by Hole Size

4" to 7-7/8"

9" - 10-3/4"

14" to 17"

8" to 8-7/8"

11" to 12-5/8"

Design Theory

Tuscan Capitals

Tuscan Order Design Page

Tuscan capitals originate from the Etruscan community in ancient Italy. They have 2 distinctive parts a Square Abacus and a Round Echinus. Although used ancient times, they have great appeal today in both classical and modern architecture. ImperialProductions® can create exact custom Historic Duplications of existing Capitals. Specify Tuscan capitals whole or split for Post Wrap or Pilaster applications. Non Wood composite capitals are made from molds which includes FRP-PolyCompTM, GRG-NeoPlasterTM, Fiberglass, ArchPolymerTM and GFRC-ZeamentTM. Custom Hardwood Tuscan capitals are made to a maximum of 36" diameter 3 to 24 Feet high in 24 hardwood species to any specified size with load bearing solid or hollow cores. For load bearing applications we offer White Oak Load Plugs that fit into the hollow center of the capital or base. Finish your Capitals with Specialty Paints and Real Metal Coating

Custom Sizes Made from Hardwoods or Composites

Select from 24 solid Hardwoods to create exact Historic Duplications of existing Capitals with micro precision

Composites can be created with new molds. These hollow Tuscan Capitals serve as decorative elements to wrap load bearing posts

<= Click the Form

Fill in Measurements and Specify the Materials

The Standard Collection

Tuscan Capital 4" to 7-3/4"

Item 1) Hole 4-1/4" (10.8cm)	Buy Options	Materials






IPTC006-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 4" round top of column (approximate 4-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 2) Round Flat 4-1/2" (10.79cm)	Buy Options	Materials





IPWTC04-CAP is a Tuscan Hardwood Capital with a square Abacus with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 4-1/2" links to the top of the column shaft at 4". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 2) Round Flat 5-1/4" (10.79cm)	Buy Options	Materials





IPWTC05-CAP is a Tuscan Hardwood Capital with a square abacus with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 5-1/4" links to the top of the column shaft at 5". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 4) Hole Fits 5-13/16" column	Buy Options	Materials






IPTB6CAP is a simplified Tuscan Capital molded as 1 piece (Squared Abacus & Round Echinus). The hole fits around a 5-11/16" round top of column (approximate 5-13/16" hole size). The column's load resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 5) Hole Fits 6-1/8" (15.5) column	Buy Options	Materials






IPTB500-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 6" round top of column (approximate 6-1/8" hole size). The column's load resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 6) Hole 6-1/4" (15.9cm)	Buy Options	Materials






IPDC301-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 6" round top of column (approximate 6-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 7) Hole 6-1/4" (15.8)	Buy Options	Materials






IPTB301-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 6" round column (approximate 6-1/4" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 8) Round Flat 8-1/2" (21.59cm)	Buy Options	Materials





IPWTC06-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 6-1/4" links to the top of the column shaft at 5". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 9) Hole 6-1/2" (16.5cm)	Buy Options	Materials






IPDC08-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 6-1/4" round top of column (approximate 6-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in PolyComp or ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 10) Hole 6-1/2" (16.5cm)	Buy Options	Materials






IPMRD0600-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 6-1/4" round top of column (approximate 6-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 11) Hole 6-5/8" (16.8cm)	Buy Options	Materials






IPTC008-CAP is a Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 6-1/2" round column (approximate 6-5/8" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 13) Hole 7-5/8" (19.36cm)	Buy Options	Materials






IPTC010-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole is 7-5/8" and fits around top of column approximate 7-1/2". The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 14) Hole 7-3/4" (19.36cm)	Buy Options	Materials






IPTB8-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 6-1/4" round top of column (approximate 6-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 15) Hole 7-3/4" (19.6cm)	Buy Options	Materials






IPDC10-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 7-1/2" round top of column (approximate 7-3/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in PolyComp or ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Tuscan Capital 8" to 8-7/8"

Item 16) Round Flat 8-1/4" (20.95cm)	Buy Options	Materials





IPWTC08-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 8-1/4" links to the top of the column shaft at 8". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 17) Hole 8-1/4" (20.96cm)	Buy Options	Materials






IPTB800-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 8" round top of column (approximate 8-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 18) Hole 8-3/8" (21.27cm)	Buy Options	Materials






IPDC300-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 8" round top of column (approximate 8-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 19) Hole 8-1/4" (21cm)	Buy Options	Materials






IPTB501-CAP is a Tuscan Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 8" round top of column (approximate 8-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 20) Hole 8-1/4" (20.9cm)	Buy Options	Materials






IPTB300-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 8" round column (approximate 8-1/4" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 21) Hole 8-5/8" (21.9cm)	Buy Options	Materials






IPMRD0601C-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 8-1/2" round column (approximate 8-5/8" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Tuscan Capital 9" to 10-3/4"

Item 22) Hole 9-3/8" (23.8cm)	Buy Options	Materials






IPTC012-CAP is a Tuscan / Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 9-1/4" (23.4cm) round top of column (approximate 9-3/8" (23.8cm) hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 23) Hole 9-1/2" (24.1cm)	Buy Options	Materials






IPDC12-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 9-1/4" round top of column (approximate 9-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 24) Hole 9-3/4" (24.7cm)	Buy Options	Materials






IPTB10-CAP is a Tuscan Square Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 9-5/8" round top of column (approximate 9-3/4" (24.7cm) hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 25) Hole 9-3/4" (24.7cm)	Buy Options	Materials






IPTB509-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around a 9-5/8" round column (approximate 9-3/4" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Item 26) Hole 10" (25.4cm)	Buy Options	Materials






IPTB803-CAP is a simplified Tuscan Capital molded as 1 piece (Square Abacus & Round Ovolo). The hole fits around a 9-3/4" top of round column. The hole Size approximately 10" (25.4cm). The column's load resides on the substrate. Capital height is 5-3/4" (14.6cm). The Capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This Capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 27) Hole 10-1/8" (25.7cm)	Buy Options	Materials






IPTB503-CAP is a simplified Tuscan Capital molded as 1 piece (Square Abacus & Round Ovolo). The hole fits around a 9-3/4" top of round column. The hole Size approximately 10-1/8" (25.4cm). The column's load resides on the substrate. Capital height is 3-1/4" (8.25cm). The Capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This Capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 28) Hole 10-1/4" (26cm)	Buy Options	Materials






IPTB302-CAP is a simplified Tuscan Capital molded as 1 piece (Square Abacus & Round Ovolo). The hole fits around a 10" (25.4cm) top of round column. The hole Size approximately 10-1/4" (26cm). The column's load resides on the substrate. Capital height is 5-3/4" (14.6cm). The Capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This Capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 29) Hole 10-1/4" (26cm)	Buy Options	Materials






IPDC302-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 10" round top of column (approximate 10-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 30) Round Flat 10-1/4" (26cm)	Buy Options	Materials





IPWTC10-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 10-1/4" links to the top of the column shaft at 10". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 31) Hole 10-3/4" (27.3cm)	Buy Options	Materials






IPMRD0602-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The square abacus is 15" x 15" (38cm). The hole is 10-3/4". The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Tuscan Capital 11" to 12-5/8"

Item 32) Hole Fits 11-5/8" (29.52cm)	Buy Options	Materials






IPTC014-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 11-1/2" round column (approximately 11-5/8" (29.52cm) hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRGNeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 33) Hole Fits 11-3/4" (29.8cm)	Buy Options	Materials






IPTB12-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 11-5/8" round column (approximately 11-3/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRGNeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 34) Hole 11-3/4" (29.8cm)	Buy Options	Materials






IPDC14-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 11-1/2" round top of column (approximate 11-3/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional Materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 35) Hole 11-7/8" (30cm)	Buy Options	Materials






IPTB512-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The Abacus is 17" x 17" (43cm). The hole is 10-3/4". The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 36) Hole 12-1/8" (30.8cm)	Buy Options	Materials






IPTB506-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 12" round column (approximately 12-1/8" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications and GFRC-ZeamentTM a portland cement composite for high traffic commercial applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 37) Hole 12-1/4" (31.1cm)	Buy Options	Materials






IPDC303-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 12" round top of column (approximate 12-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 38) Round Flat 10-1/4" (26cm)	Buy Options	Materials





IPWTC12-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 12-1/4" links to the top of the column shaft at 12". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 39) Hole 12-1/2" (31.7cm)	Buy Options	Materials






IPTB505-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 12-1/4" round column (approximately 12-1/2" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications and GFRC-ZeamentTM a portland cement composite for high traffic commercial applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 40) Hole 12-5/8" (32cm)	Buy Options	Materials





IPTMRD0603-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Squared Abacus). The hole fits around a 12-3/4" round column (approximately 12-5/8" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications and GFRC-ZeamentTM a portland cement composite for high traffic commercial applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated.

Item 41) Hole Fits 13-3/4" (34.9cm)	Buy Options	Materials






IPTB14-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole is 13-3/4" (34.9cm) and fits a round column. The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRGNeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 42) Hole 13-7/8" (35.2cm)	Buy Options	Materials






IPTB016-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 13-3/4" round column (approximately 13-7/8" hole size). The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Tuscan Capital 14" to 17"

Item 43) Hole 14" (35.56cm)	Buy Options	Materials






IPDC16-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 13-3/4" round top of column (approximate 14" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional Materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 44) Hole 14-1/8" (35.8cm)	Buy Options	Materials






IPPCTC14-CAP is a Tuscan/Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 12" round top of column (approximate 12-1/8" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 45) Round Flat 14-1/4" (36.19cm)	Buy Options	Materials





IPWTC14-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 14-1/4" links to the top of the column shaft at 14". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 46) Hole 14-1/4" (36.2cm)	Buy Options	Materials






IPDC304-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 12" round top of column (approximate 12-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 47) Hole 14-1/4" (36.2cm)	Buy Options	Materials






IPTC304-CAP is a Tuscan Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 14" round top of column (approximate 14-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 48) Hole Fits 15-5/8"(39.6cm)	Buy Options	Materials






IPTB16-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 15-1/2" round column (approximately 15-5/8" hole size) with the column's load residing on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRGNeoPlasterTM for interior fire rated applications and GFRC-ZeamentTM a Portland cement composite for high traffic commercial applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 49) Hole 15-7/8" (40.3cm)	Buy Options	Materials






IPTB18-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 13-3/4" round column (approximately 13-7/8" hole size). The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Item 50) Hole 16" (40.64cm)	Buy Options	Materials






IPDC18-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 15-3/4" round top of column (approximate 16" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 51) Hole 16-1/4" (41.2cm)	Buy Options	Materials






IPDC305-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 16" round top of column (approximate 16-1/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior. Optional materials include ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 52) Round Flat 16-1/4" (41.2cm)	Buy Options	Materials





IPWTC16-CAP is a Tuscan Hardwood Capital with a square plinth with a bevel and a round echinus also with a bevel. The flat portion of the echinus at 16-1/4" links to the top of the column shaft at 16". Being solid hardwood staves, it is load bearing. Use White Oak and White Pine for exterior applications. They are sold in pack of 2.

Item 53) Hole 17-1/8" (43.49cm)	Buy Options	Materials






IPTC020-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 17" round column (approximately 17-1/8" hole size). The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Item 54) Hole 17-1/2" (43.1cm)	Buy Options	Materials






IPDC20-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 17" round top of column (approximate 17-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 55) Hole 17-5/8" (44.76cm)	Buy Options	Materials






IPTB18-CAP is a Square Tuscan Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 18" round top of column (approximate 17-5/8" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 56) Hole 18-5/8" (47.3cm)	Buy Options	Materials






IPTB022-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 18-1/2" round column (approximately 18-5/8" hole size). The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Item 57) Hole 19" (48.3cm)	Buy Options	Materials






IPDC22-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 18-1/2" round top of column (approximate 19" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 58) Hole 19-3/4" (49.84cm)	Buy Options	Materials






IPTB20-CAP is a Tuscan Round Capital molded as 1 piece (Squared Abacus & Round Echinus). The hole fits around a 24" round top of column (approximate 23-5/8" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 59) Hole 20-1/8" (51.11cm)	Buy Options	Materials






IPTB024-CAP is a simplified Tuscan Capital molded as 1 piece (Round Echinus & Square Abacus). The hole fits around an 20" round column (approximately 20-1/8" hole size). The capital does not hold load. It is available in ArchPolymerTM a lite weight composite material and optionally, GRG-NeoPlasterTM for interior fire rated applications. Customize by optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for an outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This base can be ordered FactoryPainted or components can be RealMetalCoated.

Item 60) Hole 20-1/2" (43.1cm)	Buy Options	Materials






IPDC24-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 20" round top of column (approximate 20-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 61) Hole 23-5/8" (60cm)	Buy Options	Materials






IPTB24-CAP is a Tuscan Round Capital molded as 1 piece (Squared Abacus & Round Echinus). The hole fits around a 24" round top of column (approximate 23-5/8" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 62) Hole 27-1/2" (43.1cm)	Buy Options	Materials






IPDC30-CAP is a Doric Capital molded as 1 piece (Stepped Abacus & Round Echinus). The hole fits around a 27" round top of column (approximate 27-1/2" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 63) Hole 29-3/4"	Buy Options	Materials






IPTB30-CAP is a Tuscan Round Capital molded as 1 piece (Squared Abacus & Round Echinus). The hole fits around a 30" round top of column (approximate 29-3/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

Item 64) Hole 35-3/4"	Buy Options	Materials






IPTB36-CAP is a Tuscan Round Capital molded as 1 piece (Squared Abacus & Round Echinus). The hole fits around a 36" round top of column (approximate 35-3/4" hole size). The column's load from the lintel resides on the substrate. The capital does not hold load. It is available in Fiberglass. Optional materials include ArchPolymerTM a lite weight composite material rot water and insect resistant for interior and exterior, ArchPolymerTM Class A Fire Rated, GRG-NeoPlasterTM for interior fire rated applications, GFRC-ZeamentTM a Portland cement composite Class A fire rated for high traffic commercial interior and exterior applications. Customize with optional factory cuts. Specify Split for Pilaster up against a wall, Split for Post wrap, Wedged for outside corners, Section cut for Wall Wraps - specify the size, Quartered for inside corners, or Engaged for portion cuts for Pilaster applications. This capital can be ordered FactoryPainted or components can be RealMetalCoated

INTERNAL SUPPORTS

Post Wrap Charts

CAD drawing for Post Wraps. How to fit a square post into a round hole. Drawings for multiple sizes.

Explore the Charts

Steel Load Posts

Custom Made to Order

Load posts can be ordered for post wraps. Custom made from Galvanized steel to wrap Decorative columns.

Explore Steel Load Posts for Wraps

MATERIALS

Explore Short Video on the 6 Materials for Colunn Bases.

Watch the Video

Hardwood

Hand Crafted

All parts can be

customized

Hardwood Columns

Interior Stain & Paint: American Poplar, Alder, Ash, Basswood,

Beech, Birch Cherry, Maple, Maple (Sap), Mahogany-African,

Oak (Red), Oak (White), Walnut

Exterior (Stain & Paint)

White Pine, Knotty Pine, Clear Pine, Western Red Cedar

Explore Hardwoods

Explore how to treat hardwood columns and bases for rot protection.

Explore Treating Hardwoods

Fiberglass

Interior / Exterior

Made from Molds

Fiberglass

Load Bearing Columns

Fiberglass is a combination of polyester resins and glass fibers with a Gelcoat covering. They are made from molds and approximately 2-3lbs per square foot. Fiberglass is weather resistant and is suitable for emersion in water for fountains. The tensile strength is superior for earthquakes and hurricane zones however they do requires to be affixed to the substrate with hardware supplied by others. Fiberglass columns meet ASTM-E84 fire rating standards when specified as an upgrade. They are molded in 2 pieces and seamlessly put together when ordered whole. Specify in halves for post wrap or pilaster applications or wedged for corners.

Use Bondo to cover seams. Expensive new molds are required for customization however they can be cut to height by the factory or others.

Explore Fiberglass

FRP-PolyCompTM

Interior / Exterior

Made from Molds

FRP-PolyCompTM

Load Bearing Composite Columns

FRP is 70% calcium carbonate, 5% marble chips, 25% Polyester Resins.

Meets ASTM-E84 fire rating. Specify in halves for post wrap or pilaster applications or wedged for corners. Expensive new molds are required for customization however they can be cut to height by the factory or others.

Explore FRP-PolyCompTM

ArchPolymerTM

Interior / Exterior

Made from Molds

ArchPolymerTM

Decorative Columns

ArchPolymerTM is a synthetic wood with the same consistency as white pine. It is not a plastic. It is rot, water and insect resistant, cuts like wood and comes white primed. Class A Fire Rating is an upgrade that can be specified to put into the mix. They are molded in 2 pieces. Use our PolySpackling Compound to cover any seams. They can be cut to height by the factory or others. For custom sizes for volume orders request a quote.

Explore ArchPolymerTM

GRG-NeoPlasterTM

Made from Molds

GRG-NeoPlasterTM

Decorative Interior Columns

Alpha gypsum, cement, water, re-enforced with glass fibers.

Lite weight 2-3lbs per square foot. Meets ASTM-E84 Fire rated.

Odorless and emission free. Interior use only in dry areas.

Made in a mold in 2 pieces - tape & mud seam.

Customization by cutting bottom of the shaft

Explore GRG-NeoPlasterTM

Watch our YouTube Video

GFRC-ZeamentTM Attic Bases

To replace rotted or broken bases, GFRC-ZeamentTM is the perfect solution! It is a composite of Portland cement and polymers producing a smooth exterior finish. It is strong, heavy and load bearing. The Torus and Plinth are hollow, however the Plinth is wide enough to carry column loads. Custom sizes are available from 6" to 48" diameter. Large bases are made in 2 parts Torus and Plinth or split for reassembly around an existing column shaft.

Explore GFRC-Zeament

FINISHING

Real Metal Coating

All of the column materials can be coated with real metal. This applies particularly to captials and bases. We have done real metal coating on column shafts as well

Explore Real Metal Coating

Metallic Paints

For finishing shops or the DIY client, we offer Ronan Aqua Leaf Real Metal Paints. Apply with an air brush or regular brush for highlighting golds, silvers and bronzes.

Explore Ronan Paints