Wood

 Reproductions

  View Page

 Hardwoods

  Hand Crafted

  All parts can be customized

  Interior Paint Only: Finger Joint Pine

   Interior Stain & Paint: American Poplar,  Alder, Ash, Basswood, Beech, Birch

   Cherry, Maple, Maple (Sap), Mahogany-African, Mahogany-African

   Oak (Red), Oak (White), Walnut

   Exterior (Stain & Paint) White Pine, Knotty Pine, Clear Pine, Western Red Cedar

   Made in 5 Parts

   Whole Shafts or Split for Pilaster & Post Wrap

   Custom Heights with the correct enthasis

 ArchPolymerTM

   Made from Molds

 Interior & Exterior Composite

   Hi-density polyurethane with consistency of White Pine

   Primed White

   Water,  rot, and insect resistant

   Cuts like wood and can be split for post wrap or Pilaster application

   Customization by cutting bottom of shaft

   Made in 3 Parts

 NeoPlasterTM

 a GRG Product  

 Made from Molds

 Interior Composite

   Alpha gypsum, cement, water, re-enforced with glass fibers. 

  Lite weight 2-3lbs per square foot. Meets ASTM-E84 Fire rated.

  Odorless and emission free. Interior use only in dry areas. 

  Made in a mold in 2 pieces - tape & mud seam.

  Customization by cutting bottom of the shaft

 Fiberglass

 Interior / Exterior use

 Interior & Exterior Composite

  Gelcoat, polyester resin and glass fibers.  Lite weight 2-3lbs per square

  foot.  Weather resistant for earthquakes and hurricane zones. 

  Meets ASTM-E84 fire rating. 

  Water resistant for fountains and water displays.

  Mold 2 pieces, Bondo to cover seam, no customization, cut to height

 PolyCompTM

 Interior / Exterior use

 Made from Molds

 Load Bearing Composite Columns 

  70% calcium carbonate, 5% marble chips, 25% Polyester Resins

  Meets ASTM-E84 fire rated.  Order whole or split for Post Wrap / Pilaster.

  No customization, cut to height, cut to height. 

  Post Wrap may involve modification of your load bearing posts

   or removal of tabs by others

 ZeamentTM

 Interior / Exterior use

 Made from Molds

 Exterior Composite Columns 

 Lite weight Portland cement, sand, alkali resistant fibers aggregates,

 polymer adhesive and water Smooth internally pigmented 12 colors

 Sandblasted for Stone Look Hurricane, earthquake zone.

 Can be submerged in water  Meets ASTM-E84 Fire rating

 Odorless and emission free safe for indoor use. 

 Made with natural raw materials can experience light variations in color

 and texture. 

 Molded in 2 parts

 Seam remains as a reveal.

 StoneMoldTM

 Interior use

 Made from Molds

 Interior Composite Columns 

 Molded stone: Alpha gypsum, pigment, aggregates water and polymers.

 Looks like natural stone.  Weight 2-5 lbs / Foot. 

 Sealed with clear finish.  Made with natural raw materials and may experience slight variation in color and texture. 

 Molded in 2 parts

 seam remains as a reveal. 

  How to Order Products  1-800-399-7585     416-264-6096  

   COPYRIGHT  MRDCI Martin Richards Design and Contracting Inc, Martin Richards DesignTM 

     and Imperial Productions®                                                        Feb 2018  all rights reserved